Shop

The app is used for the convenient configuration of SmartTouch, RoomTouch and IPTouch.

The app is used for convenient configuration of SmartTouch 10.

The app is used for the convenient configuration of SmartTouch 10.

The app is used for the convenient configuration of 2.4" Display (Trevion, alba, SIDUS, SAGA).

This App is needed for configuration of the ABB SUG/U 1.1 Split Unit Gateway. The manufacturer of the split unit and the model of the remote are loaded into the ETS application.
All SUG/U 1.1 in the project can be processed at the same time. The download into the device is done by normal ETS download.

This app integrates the software suite ABB Automation Builder into ETS.
The Automation Builder is used to create the automation programs for the BAC/S Building Automation Controllers and the ABB AC500 Programmable Logic Controllers (PLC).
With this app, the data exchange of the KNX Group Objects defined in the automation programs takes place with the ETS.
These app transfer the KNX Group Objects used in the automation programs to the ETS. It supports the BAC/S1.x.1 Building Automation Controllers as well as the ABB AC500 Programmable Logic Controllers (PLC) with activated KNX runtime license (PS5604-KNX).

With the WAREMA KNX SMI multiple actuators in surface-mounted or DIN rail-mounted housing, up to 16 SMI LoVo drives can be controlled independently of one another or in up to 16 groups. The manual override operation and status display of the binary inputs via the Bluetooth App and DCA App is unique and, additionally, operation is possible on the actuator itself. Commissioning and motor search/allocation is done via smartphone or the ETS DCA App. This app can also be used to read out and acknowledge the SMI Motor error list or to learn in tilt pulses.

https://youtu.be/EiAx1fra4ME

DCA for commissioning the DALI devices and for setting their parameters for the DALI/KNX Gateway DA64-230/KNX REG, Part No. 93302

The ETS app "ABB Firmware Update 2.0" serves for updating the firmware of different ABB KNX devices directly via the KNX bus. The latest firmware files can be downloaded automatically from the Internet or imported manually.
The app can be used with the ETS 5 or higher.

Attention:
It replaces the "KNX Bus Update" app.

DLC-02-KN is a KNX to DALI gateway, used to connect DALI ECGs/ Driver via KNX installation.
This device Configuration App (DCA) is designed for the special surface for the DALI configurations.

DALI Gateway IC02D01DAL DCA

This DCA enables the KNX IQ08 TPS from DIVUS GmbH to be commissioned. With the separate software DIVUS VISION for Windows the KNX IQ08 TPS can be parameterized easily and intuitively. Afterwards the configuration file is imported into the ETS via the DCA, where the group addresses are linked. The download is then carried out via the ETS standard mechanism. Furthermore, an existing parameterization can be exported in the DCA and thus be edited in the DIVUS VISION for Windows.

DCA to set the mapping between KNX datapoints and Modbus registers

To carry out the DALI commissioning and the DALI test to the KNX DALI-2 Gateway sec. this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears by using the familiar ETS environment without having to use additional software beyond the ETS.

Blumotix s.r.l.
Device Configuration App (dca) for BX-DALI-PLUS (AV06)
Order number: BX-DALI-PLUS
Application: BX-DALI-PLUS (AV06)
Device configuration DCA for the dali bus definition. The application is used to configure only DT6 dali devices, first enumeration, post-installation, groups and scenes.

For easy configuration of the Modbus KNX Gateway MG/S 11.100.1.1. With this DCA, the mapping of the Modbus KNX data points of a server can be exported as a reusable template. The DCA can also be used to import ready-made device templates from a database.

This Gira Device Configuration App (DCA), which is fully integrated into the ETS and supplements the standard parameter dialog, is used to carry out DALI commissioning and the DALI test for the Gira DALI Gateway Colour (order number 2111 00, 2112 00). This makes it possible to identify, address and assign DALI operating devices using the familiar ETS environment without having to use additional software beyond the ETS.

Graphical tool for integration of KNX networks, providing a flexible and user-friendly interface based on floor plans. Ideally suited for commercial building, retail shops or hotels of any size. The tool is particularly suited for flexible room automation.

KNX Space Commissioning works with any device from any manufacturer.
A KNX device is described into a collection of assets (ex. lamps, switches, sensors, etc.). Then, each asset can have different usages adjusting its parameters.

The assets are then gathered under a space, which dynamically creates the right Group Addresses (with Group Objects). A space may be an office, a room in hotel, a corridor, a facade, etc.
All the engineering is dynamic and gets adapted to the space created, whether it is large, small, with more or less assets, etc.
The solution can be exported as a package and reused across projects.

KNX Space Commissioning also allows the export of the project into the ABB Building Edge, which is a solution hosting applications such as ABB Ability Control Hub, used for monitoring and control of buildings.

DALI2 Gateway IC01D03DAL DCA

DCA for the DALI configuration of the KNX DALI2 Gateway secure TYFS671D and TYFS672D.

DALI Gateway GRDALI-TW02-KNX DCA

ABB Building Planner Import

To carry out the DALI commissioning and the DALI test to the KNX DALI-2 Gateway sec. this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears by using the familiar ETS environment without having to use additional software beyond the ETS.

The ETS-App Update Copy Convert provides a series of useful functions for the ETS application and device configuration (parameters and group addresses) in an ETS project.
The functions are:
Update: Changes the application program to a later or earlier version while retaining current configurations.
Convert: Transfers/adopts a configuration from an identical or compatible source device.
Channel Copy: Copies a channel configuration to other channels on a multichannel device.
Channel Exchange: Exchanges configurations between two channels on a multichannel device.
Import/Export: Saves and reads device configurations as external files.

This app is used to configure the AC / S 1.x.1 Application Controllers. The graphical user interface of this app allows an intuitive parameterization of the application-specific automation modules (ASM).Basic device settings and device programming (download) are also possible without this app.

Griesser offers innovative configuration options. Using a tile system, functions are «stacked» according to their priority. This is similar to the list of priorities in a requirements specification.
Despite the high degree of flexibility, no programming language has to be learned because the intuitive tiles are configured in the predefined and tested scope. Each tile also contains «its own» communication objects and specific settings options.
After successful configuration, the functionality can be tested online and the individual statuses of each tile can be graphically visualized.

The IoT Dashboard ETS App enables you to export the complete building structure and all group addresses from the ETS into the IoT Dashboard. This dashboard provides you with preprogrammed frames to get fast and high quality results. It makes it possible to do changes very quick and easy and thanks to this app you can load all data back into ETS very quickly.

Installation assist app for the Becker SMI KNX actuator.

This app is used to import the KNX configuration file for the GM/A 8.1 KNX Security Panel into ETS. Importing the KNX configuration file enables all relevant group objects of the KNX Security Panel in ETS. This app is not needed for general device settings or for device programming (download).

Area of application:
The FM-actuator devices SA/U1.16.x2 und SAH/U2.16.x2 can be maintained comfortably using the ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).

Device configuration application for PLC-based WAGO devices.

The app is used for the convenient configuration of 2.4" Display (Trevion, alba, SIDUS, SAGA).

This ETS App is intended to exchange Group Address information of Busch-ComfortTouch® panels from Busch-Jaeger or ABB between ETS and IPP. The ETS App provides IPP data with recent changes in ETS and vice versa ETS data in IPP. By pressing the import button you can import XML files that were created by IPP into ETS. Using the export button you can generate an XML file for import into IPP.

DCA App for Updating MDT devices.
The following devices are currently supported:
AKD-0201.02
AKD-0401.02

AKD-0424R.02
AKD-0424R2.02
AKD-0424V.02
AKD-0324V.02
AKD-0224V.02

AKI-0416.04
AKI-0816.04
AKI-1216.04

BE-GTL10x.x1
BE-GTL1Tx.x1
BE-GTL20x.x1
BE-GTL2Tx.x1
BE-GTL40x.x1
BE-GTL4Tx.x1

BE-TAL5501.x1
BE-TAL55T1.x1
BE-TAL5502.x1
BE-TAL55T2.x1
BE-TAL5504.x1
BE-TAL55T4.x1

BE-TAL6301.x1
BE-TAL63T1.x1
BE-TAL6302.x1
BE-TAL63T2.x1
BE-TAL6304.x1
BE-TAL63T4.x1

SCN-BWM55.x2
SCN-BWM55T.x2

SCN-LOG1.02
SCN-SAFE.01

SCN-RTN55S.01
SCN-RTR55S.01
SCN-RTR55O.01
SCN-TFS55S.01

SCN-G360D3.03
SCN-G360K3.03
SCN-P360D3.03
SCN-P360D4.03
SCN-P360K3.03
SCN-P360K4.03
SCN-P360E3.03

Device Configuration App (DCA) for IPAS DALIControl gc16plus (1 or 2 Channel)
Order No.: 4101-145-11, 4101-145-21
Application: DaliControl gc16-1 Plus_V1.1.0, DaliControl gc16-2 Plus_V1.1.0

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

Device Configuration App (DCA) for commissioning the DALI participants.
For the MDT DALI Control 64 Gateway with article number SCN-DA641.04 and SCN-DA642.04

Device Configuration App (DCA) for Wieland Electric KNX-DALI Gateway gesis KNX FLEX-DA64
Order number: 83.020.0643.0
Application: gesis KNX FLEX-DA64 V1.0

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

Device Configuration App (DCA) for IPAS DALIControl e64 Pro V2
Order No.: 4101-145-02/03
Application: DaliControl e64 Pro_V2.1.0

Support of Input Devices
Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

Device Configuration App (DCA) for Ekinex KNX/DALI gateway EK-BF1-TP-D1 (1 channel) or EK-BF1-TP-D2 (2 channels)
Order No.: EK-BF1-TP-D1 DALI2 1CH, EK-BF1-TP-D2 DALI2 2CH
Application: APEKBF1TPD1_V1.1.0, APEKBF1TPD2_V1.1.0

Coloured light control including device type 8 ECGs
Colour temperature (DT-8 Sub-Type Tc)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)
DT-8 Sub-Type PrimaryN is not supported.

Graphical tool for integration of KNX networks, providing a flexible and user-friendly interface based on floor plans. Ideally suited for commercial building, retail shops or hotels of any size. The tool is particularly suited for flexible room automation.

KNX Space Commissioning works with any device from any manufacturer.
A KNX device is described into a collection of assets (ex. lamps, switches, sensors, etc.). Then, each asset can have different usages adjusting its parameters.

The assets are then gathered under a space, which dynamically creates the right Group Addresses (with Group Objects). A space may be an office, a room in hotel, a corridor, a facade, etc.
All the engineering is dynamic and gets adapted to the space created, whether it is large, small, with more or less assets, etc.
The solution can be exported as a package and reused across projects.

KNX Space Commissioning also allows the export of the project into the ABB Building Edge, which is a solution hosting applications such as ABB Ability Control Hub, used for monitoring and control of buildings.

DCA to reload and change the symbols in the MDT Smart Button range.
Update function for the firmware of the MDT Smart buttons.
Supported devices:
BE-GT20W.01
BE-GT20S.01
BE-GT2TW.01
BE-GT2TS.01
BE-TAS86.01
BE-TAS86T.01
BE-TAS5504.01
BE-TAS55T4.01
BE-TAS6304.01
BE-TAS63T4.01

DCA for configuring ERA INN KNX interface DIN module.

DCA to set the mapping between KNX datapoints and Modbus registers

Device Configuration App (DCA) for IPAS DALIControl gc16 (1 or 2 Channel)
Order No.: 4101-145-11, 4101-145-21
Application: DaliControl gc16-01-0110, DaliControl gc16-2-01-0110

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

TheKNX DALI-Gateway Basic REG-K is a device used to control ECGs with a DALI interface via the KNX installation bus.

The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

The KNX DALI-Gateway Basic REG-K is a device used to control ECGs with a DALI interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

DCA for commissioning the MDT DaliControl Gateway DALI16 or the MDT DaliControlGateway32.
This DCA can be used to commission and configure the DALI devices. The DALI subscribers can be assigned to the various groups and scenes and time controls can be implemented.
For more information: http://www.mdt.de

This application allows the download of custom images to be used as screensaver in Zennio Z28, Z35, Z35 H, Z35 v2 and Z40 touch panels.
The image dimensions must be 320x240 pixels. Supported formats: png, .jpg, .jpeg and .bmp.

Device Configuration App (DCA) for IPAS DALIControl e64
Order No.: 4101-145-01
Application: DaliControl e64-01-0310

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

DCA for loading and changing the symbols in the MDT Operation Unit Smart.

DCA for commissioning the MDT DaliControl Gateway SCN-DALI64.03.
This DCA can be used for commissioning and configuration of the DALI devices. The DALI devices can be assigned to the various groups and scenes and time controls can be implemented.
For more information: http://www.mdt.de

Device Configuration App (DCA) for Theben DALI-Gateway KNX plus
Order number: 9070929
Application: DALI-Gateway KNX plus (v2.0)
New features:
Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

The KNX DALI-Gateway REG-K is a device used to control ECGs with a DALI interface via the KNX installation bus.

The special surface for the configuration of DALI segments is designed as a DCA (Device Configuration App) for the ETS5.

The KNX DALI-Gateway REG-K/IP1 is a device used to control ECGs with a DALI interface via the KNX installation bus.

The special surface for the configuration of DALI segments is designed as a DCA (Device Configuration App) for the ETS5.

The Weinzierl KNX Modbus Gateway ConfigTool provides a so-called DCA (Device Configuration App) for the ETS. With this it is possible to configure a Weinzierl KNX Modbus RTU Gateway 886 database and import it into another gateway. This saves a tedious manual configuration.

This DCA is used to configure weekly program parameters for Multi Functional Switch MS104 and MS104-D

The Csv Importer (DCA) enables a simple and effective configuration of the KNX TP communication module CM8400 from Neuberger Gebäudeautomation GmbH.
The configuration can be exported or imported into a CSV file. Via the CSV file, the configuration can be synchronised with the AS project in PMC Studio or re-imported in another project. Thus a laborious configuration by hand is spared.

This DCA is used to configure IR Interface IR100.

Device Configuration App (DCA) for IPAS DALIControl e64 Pro
Order No.: 4101-145-02/03
Application: DaliControl e64 Pro-01-0110

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

The SpaceLogic KNX DALI Gateway Pro is a device used to control ECGs with a DALI 2.0 interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

Device Configuration App (DCA) for theben DALI-Gateway S64/S128 KNX
Order number: 4940301, 4940302
Application: DALI-Gateway S64 KNX, DALI-Gateway S128 KNX

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

This DCA enables the KNX panel 8" from JUNG to be commissioned. With the seperate software JUNG KNX SMART PANEL DESIGNER the KNX-Panel 8" can be parameterized easily and intuitively. Afterwards the configuration file is imported into the ETS via the DCA, where the group addresses are linked. The download is then carried out via the ETS standard mechanism. Furthermore, an existing parameterization can be exported in the DCA and thus be edited in the JUNG KNX SMART PANEL DESIGNER.

The SpaceLogic KNX DALI-Gateway Basic Plus is a device used to control ECGs with a DALI interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

For devices with firmware version V1.x
Device Configuration App (DCA) for commissioning the DALI participants.
For the MDT DALI Control PRO64 Gateway with article number SCN-DA641P.04S

Theben DALI-Gateway S64 KNX, Theben DALI-Gateway S128 KNX
Order no.: 4940301, 4940302
Application: DALI-Gateway S64 KNX V2, DALI-Gateway S128 KNX V2

Device Configuration App (DCA) for the DALI configuration.
The DCA is used for addressing and grouping, as well as creating scenes and timers.
This DCA is compatible with the above application (V2) and devices with firmware 0.3x.

Theben DALI-Gateway P64 KNX
Order no.: 4940303
Application: DALI-Gateway P64 KNX

Device Configuration App (DCA) for the DALI configuration. The DCA is used for addressing and grouping, as well as creating scenes, timers and effects.

This DCA Version A enables the KNX panel 7" Version A from Feller to be commissioned. Via the ConfigTool Version A the KNX-Panel 7" can be parameterized easily and intuitively. Afterwards the configuration file is imported into the ETS via the DCA, where the group addresses are linked. The download is then carried out via the ETS standard mechanism. Furthermore, an existing parameterization can be exported in the DCA and thus be edited in the ConfigTool.

This DCA enables the KNX-Panel 7" Version B from Feller to be commissioned. Via the ConfigTool Version B the KNX-Panel 7" version B can be parameterized easily and intuitively. Afterwards the configuration file is imported into the ETS via the DCA, where the group addresses are linked. The download is then carried out via the ETS standard mechanism. Furthermore, an existing parameterization can be exported in the DCA and thus be edited in the ConfigTool.

The Weinzierl Modbus TCP Gateway 716 ConfigTool provides a so-called DCA (Device Configuration App) for the ETS. With this it is possible to configure a Weinzierl Modbus TCP Gateway 716 database and import it into another gateway. This saves a tedious manual configuration.

Please note currently working only with ETS 6.1.0. We apologize for the inconviniece. We are currently working on a new version compatible with 6.1.1.

‘eConfigure KNX’ by Schneider Electric is a graphical configuration ETS app for KNX projects. This tool is adapted for residential projects and small / medium building projects. You can design the complete KNX project by drag-and-drop sensors and loads directly to a floor plan of the building and connect them easily. The actuators are automatically generated and linked to loads in each floor of the building.
Please find the product catalog: https://www.se.com/ww/en/product/LSS900100/knx-graphical-software-econfigure-knx-lite-for-250-knx-devices/
Note: ETS6 Professional is required.

ETS5 and ETS6 DCA App to update user specific songs on Hugo Mueller AS36.03 knx audio interface.

Device Configuration App (DCA) for Gewiss GW90873 - Gateway KNX/DALI 64/16 advanced

To carry out the DALI commissioning and the DALI test to the DALI-2 Gateway Colour this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears by using the familiar ETS environment without having to use additional software beyond the ETS.

The SpaceLogic KNX DALI Gateway Pro is a device used to control ECGs with a DALI 2.0 interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

Theben DALI-Gateway P64 V2 KNX
Order no.: 4940303
Application: DALI-Gateway P64 KNX V2

Device Configuration App (DCA) for the DALI configuration. The DCA is used for addressing and grouping, as well as creating scenes, timers and effects.

For devices with firmware version V2.x
Device Configuration App (DCA) for commissioning the DALI participants.
For the MDT DALI Control PRO64 Gateway with article number SCN-DA641P.04S.